Multilayer PCB Printed Circuit Board With BGA Fr4 Price FR402 Material
Quick Details:
Place of Origin:Guangdong, China (Mainland)
Brand Name: ONESEINE PCB
Base Material: Isola FR-4,CEM-1,CEM-3,Hight TG,FR4 Halogen Free,FR-1,FR-2,Aluminum
Copper Thickness:1-6OZ
Board Thickness:0.4mm-8.5mm
Min. Hole Size:0.2mm
Min. Line Width:0.1mm
Min. Line Spacing:0.1mm
Surface Finishing:HASL,HAL-LF,OSP ENIG etc
Min inner Layer Clearance::0.1mm
PCBA business:OEM&ODM servise
multi-layer:1-22 layers for your choose
Silkscreen color:white black red yellow
Solder mask color:green,red,black,blue,white,etc
Warp and Twist:≤0.7%
Production Description:
| 1 | Layer | 1-30 layer |
| 2 | Material | FR-4,CEM-1,CEM-3,Hight TG,FR4 Halogen Free,FR-1,FR-2,Aluminum |
| 3 | Board thickness | 0.2mm-7mm |
| 4 | Max.finished board side | 500mm*650mm |
| 5 | Min.drilled hole | 0.25mm |
| 6 | Min.line width | 0.075mm(5mil) |
| 7 | Min.line spacing | 0.075mm(3mil) |
| 8 | Soldering Cover Color | red/blue/yellow black/white/ green |
| 9 | Hole tolerance | PTH:±0.076,NTPH:±0.05 |
| 10 | Copper thickness | 0.5-10 oz |
| 11 | Surface treatment | HASLOSPENIGENIS etc. |
| 12 | Profiling Punching | V-CUT / Routering |
Why choose us to be your partner?
1. Quality: Our UL/RoHS standards insure quality assembly from start to finish.
Whether it's a custom sample or mass product, ONESEINE will adhere to the highest quality standards.
2. Capability: Oneseine offers the latest in assembly capabilities and qualifications
insuring that quality is built into every product we produce.
3. Experience: Our management team has over 10 years of electronic industry experience.
4. Flexibility: We listen to your unique and special business requirements patiently and then give our best solution fast.
FR4 Material Types
FR-4 has many different variations depending on the thickness of the material and chemical properties, such as the standard FR-4 and G10. The following list shows some common designations for FR4 PCB materials.
Standard FR4: This is the most common type of FR4. It provides good mechanical and moisture resistance, with heat resistance of about 140℃ to 150℃.
FR4 With High Tg: FR4 with high Tg is suitable for applications requiring high thermal cycling and temperatures greater than 150℃. Standard FR4 is limited to around 150℃, while FR4 with high Tg can withstand much higher temperatures.
FR4 With High CTI: FR4 with high CTI (Chemical Thermal Interaction) has better thermal conductivity than regular FR4 material. It has a comparative tracking index higher than 600 Volts.
FR4 without copper laminate: FR4 without copper laminate is a non-conductive material with excellent mechanical strength. It is mainly suitable for insulating boards and board supports.
FR4 G10: FR-4 G10 is a solid core material with excellent mechanical properties, high thermal shock resistance, excellent dielectric properties, and good electrical insulation properties.
The requirements of high frequency pcb material:
(1) the dielectric constant (Dk) must be very stable
(2) Dielectric loss (Df) must be small, which mainly affects the quality of signal transmission, the smaller the dielectric loss so that the signal loss is also smaller.
(3) and copper foil thermal expansion coefficient as far as possible, because inconsistencies in the change in the cold and heat caused by copper foil separation.
(4) low water absorption, high water absorption will be affected in the damp when the dielectric constant and dielectric loss.
(5) Other heat resistance, chemical resistance, impact strength, peel strength, etc. must also be good.
What Is FR4 PCB Material?
FR-4 is a high-strength, high-resistant, glass-reinforced epoxy laminate material used to fabricate printed circuit boards (PCBs). The National Electrical Manufacturers Association (NEMA) defines it as a standard for glass-reinforced epoxy laminates.
The FR stands for flame retardant, and the number 4 differentiates this type of laminate from other similar materials. This particular laminate has woven glass-reinforced epoxy resin.
FR-4 PCB refers to the board manufactured with adjacent laminate material. This material is incorporated in double-sided, single-sided, and multi-layered boards.
ONESEINE'S STANDARD FR-4 MATERIAL PROPERTIES
High Glass Transition Temperature (Tg) (150Tg or 170Tg)
High Decomposition Temperature (Td) (> 345º C)
Low Coefficient of Thermal Expansion (CTE) ((2.5%-3.8%)
Dielectric Constant (@1 GHz): 4.25-4.55
Dissipation Factor (@ 1 GHz): 0.016
UL rated (94V-0, CTI = 3 minimum)
Compatible with standard and lead-free assembly.
Laminate thickness available from 0.005” to 0.125”
Pre-preg thicknesses available (approximate after lamination):
(1080 glass style) 0.0022”
(2116 glass style) 0.0042”
(7628 glass style) 0.0075”
FR4 PCB Applications:
FR-4 is a common material for printed circuit boards (PCBs). A thin layer of copper foil is typically laminated to one or both sides of an FR-4 glass epoxy panel. These are commonly referred to as copper clad laminates. The copper thickness or copper weight can vary and so is specified separately.
FR-4 is also used in the construction of relays, switches, standoffs, busbars, washers, arc shields, transformers and screw terminal strips.
Product Tags:
|
|
Multilayer PCB printed circuit board With BGA Fr4 Price FR402 Material Images
|
